Beaumont Roofing Tips: How to Replace a Rotting Soffit

Slapping a roof on your home is a great step and come strongly recommended as one of the top Beaumont roofing tips but let’s face it, there’s more to it than that. Today we’re going to be talking about the soffit, which is a construction element of your roof. If you didn’t build your home or have no background in construction, there is a good chance that you have no idea what a soffit is, but trust us, you’ve seen it, and it is an important part of your home.

What is a Soffit – Beaumont Roofing Tips you Need

Beaumont RoofingSoffit is a piece of board, that lies right beneath the eaves on the front of your home, and also on the side. While this is a piece of your home that goes largely ignored, there is going to come a time when it becomes necessary to repair it, and because it sits front and center, you can rest assured that you and everyone who comes to your home is going to notice it. Also consider this: if you choose to leave your soffit unrepaired, it will become increasingly damaged, and that damage will easily spread to the other soffits as well as the fascia boards. That being the case, when you see a sign of damage, you’re going to want to schedule a repair and stick to it – you don’t know how long you have before the damage becomes too severe and time can really get away from you.

Take a Look at the Soffits

Anyone who offers roof repair in Beaumont will tell you that there are several reasons for which your soffits might become damaged. The most common reasons are weather damage and pest infestation (furry critters or insects), but it might simply be the age of the material. The first thing that you want to do is perform an inspection and you’re going to need a ladder.

First, and most obvious, we want to point out that ladder safety is absolutely paramount. If you use anything other than a stepladder, do make sure that it is the appropriate distance away from the house so that it does not fall over. If you are using a stepladder, make sure that it is tall enough, and that you do not ascend above the safety step.

Take a look at your soffit and begin looking for damage; in this case, as an experience Beaumont roofer, we’re telling you to look for any rot or mold that has built up. Sometimes it is obvious, other times it might be slight and subtle warping in the material.

Start Cutting – You’re On the Way to Replacing It

For this step you’re going to need a utility knife and you’ll be using it to free the soffit from the house. Cut along the edges, having found the soffit seams, and cut through the sealant. If you installed the soffit, then you know where  it is, but if this is your first time, then please, take your time and do it right; you’ll thank yourself later.

Get Rid of the Old Soffit

Beaumont roofing companyOnce you have successfully cut through the seams and feed the soffit of the wood boards, you will need to check for additional water damage. In other words, if the soffit itself is damaged, you may want to assume that the rest of the surrounding wood is damaged, at least until you can confirm that it is not.

Get it Replaced

As a top Beaumont roofing company we’ve done this a million times, at least, but we understand that your first time can be a bit harrowing. The one thing that we do want to emphasize, however, is making sure that you get the job done right the first time. As they say, measure twice, cut once, and in this case, cut the new piece of soffit to the same specifications as the old one. If the old soffit is too warped for you to make a determination, measure the hole that it came out of.

Before you install the new soffit, do make sure you prime and stain it to ensure that it is protected against the elements – you’ll thank yourself later. Now that you have your new soffit installed, you can rest easy in the knowledge that your eaves are properly protected.